Phytochemical and Biological Activity Studies on Nasturtium officinale (Watercress) Microshoot Cultures Grown in RITA® Temporary Immersion Systems

The main compounds in both extracts were gluconasturtiin, 4-methoxyglucobrassicin and rutoside, the amounts of which were, respectively, determined as 182.93, 58.86 and 23.24 mg/100 g dry weight (DW) in biomass extracts and 640.94, 23.47 and 7.20 mg/100 g DW in plant herb extracts. The antioxidant potential of all the studied extracts evaluated using CUPRAC (CUPric Reducing Antioxidant Activity), FRAP (Ferric Reducing Ability of Plasma), and DPPH (1,1-diphenyl-2-picrylhydrazyl) assays was comparable. The anti-inflammatory activity of the extracts was tested based on the inhibition of 15-lipoxygenase, cyclooxygenase-1, cyclooxygenase-2 (COX-2), and phospholipase A₂. The results demonstrate significantly higher inhibition of COX-2 for in vitro cultured biomass compared with the herb extracts (75.4 and 41.1%, respectively). Moreover, all the studied extracts showed almost similar antibacterial and antifungal potential. Based on these findings, and due to the fact that the growth of in vitro microshoots is independent of environmental conditions and unaffected by environmental pollution, we propose that biomass that can be rapidly grown in RITA^® bioreactors can serve as an alternative source of bioactive compounds with valuable biological properties.     

Online analysis of products from a direct ethanol fuel cell

Methodology for the online analysis of the main products from a direct ethanol fuel cell (DEFC) has been developed. The liquid exhaust from the fuel cell is first passed through a conductivity cell to determine the concentration of acetic acid and then CO₂ is extracted into a nitrogen stream for determination with a flow-through infrared-based CO₂ sensor. The other major product, acetaldehyde can be obtained by difference from the current. The continuous measurement of these products allows monitoring of changes in product distributions with time and operating conditions, resulting in a simple online system for rapid evaluation of anode catalysts in DEFCs.     

Electrocatalytic determination of penicillamine using multiwall carbon nanotubes paste electrode and chlorpromazine as a mediator

In this study, we describe the application of carbon paste electrode modified with multiwall carbon nanotubes as a voltammetric sensor for determination of penicillamine (PA) in the presence of chlorpromazine as a mediator. This modified electrode showed very efficient electrocatalytic activity for the anodic oxidation of PA. The peak current of linear sweep voltammograms of PA increased linearly with it’s concentration in the range of 0.5–500 μM PA. The detection limit for PA was 0.2 μM. The RSDs for 1.0 and 10.0 μM PA were 1.1 and 1.7%, respectively. The proposed sensor was successfully applied for the determination of PA in human urine and tablet.     

Normal- and Reversed-Phase Behaviour of 16,17-Secoestrone Derivatives on Cyanopropyl-Bonded Silica Gel

The retention behaviour of a number of 16,17-secoestrone derivatives has been studied by LC and HPTLC on a polar cyanopropyl-bonded stationary phase using non-aqueous and aqueous-organic mobile phases. The retention behaviour has been discussed in terms of nature of the solute, eluent and stationary phase. The correlation between retention constants of 16,17-secoestrone derivatives obtained from reversed-phases and commercially available ACD log P software (Advanced Chemistry, Toronto, Canada) has also been examined.

     

Separation of negatively charged carbohydrates by capillary electrophoresis

Capillary electrophoresis (CE) has recently emerged as a highly promising technique consuming an extremely small amount of sample and capable of the rapid, high-resolution separation, characterization, and quantitation of analytes. CE has been used for the separation of biopolymers, including acidic carbohydrates. Since CE is basically an analytical method for ions, acidic carbohydrates that give anions in weakly acid, neutral, or alkaline media are often the direct objects of this method. The scope of this review is limited to the use of CE for the analysis of carbohydrates containing carboxylate, sulfate, and phosphate groups as well as neutral carbohydrates that have been derivatized to incorporate strongly acidic functionality, such as sulfonate groups.     

Natural flavonoids interact with dinitrobenzene system in aprotic media: an electrochemical probing

Three structurally related natural flavonoids (FlOH), quercetin (Q), rutin (R) and morin (M), were investigated by cyclic voltammetry to probe their interactions with hazardous 1,4-dinitrobenzene (1,4-DNB) using a glassy carbon electrode. Scavenging of 1,4-DNB by FlOH was inferred from a positive shift in reduction potential, decrease in anodic peak current, and irreversible electrochemical behavior of 1,4-DNB on increasing the flavonoid concentration. The homogeneous bi-molecular rate constant (k2) was determined using the Nicholson-Shain equation and found to be higher for the dianion. Morin posed a comparatively higher k2 value for its interaction with the 1,4-DNB electrochemical system owing to its more acidic nature and least intramolecular hydrogen bonding. The cyclic voltammetric (CV) results were further supported by HyperchemPM3 quantum mechanical semi-empirical calculations, which point towards E(r)C(i) interactions between flavonoids and 1,4-DNB. The present investigation is biologically significant in terms of natural flavonoidal scavenging activity toward toxins such as dinitroaromatics.     

Determination of captopril in patient human urine using ferrocenemonocarboxylic acid modified carbon nanotubes paste electrode

<正>In this work,we describe a new strategy for the electrochemical determination of captopril(CA) using ferrocenemonocarboxylic acid as a mediator and multiwall carbon nanotubes as sensors in aqueous solution at pH 7.0.The diffusion coefficient(D),and the kinetic parameters such as electron transfer coefficient(α).and heterogeneous rate constant(k_h),for CA were also determined using electrochemical approaches.Under the optimized conditions,the electrocatalytic oxidation peak current of captopril showed two linear dynamic ranges with a detection limit of 0.3×10~(-6) mol L~(-1) captopril.The linear calibration range was 0.8×10~(-6) to 65×10~(-6) mol L~(-1) using cyclic voltammetry.Finally,this modified electrode was also examined as a selective,simple and precise new electrochemical sensor for the determination of captopril in real samples such as drug and patient human urine.     

Lepidium graminifolium L.: Glucosinolate Profile and Antiproliferative Potential of Volatile Isolates

Glucosinolates (GSLs) from Lepidium graminifolium L. were analyzed qualitatively and quantitatively by their desulfo-counterparts using UHPLC-DAD-MS/MS technique and by their volatile breakdown products-isothiocyanates (ITCs) using GC-MS analysis. Thirteen GSLs were identified with arylaliphatic as the major ones in the following order: 3-hydroxybenzyl GSL (glucolepigramin, 7), benzyl GSL (glucotropaeolin, 9), 3,4,5-trimethoxybenzyl GSL (11), 3-methoxybenzyl GSL (glucolimnanthin, 12), 4-hydroxy-3,5-dimethoxybenzyl GSL (3,5-dimethoxysinalbin, 8), 4-hydroxybenzyl GSL (glucosinalbin, 6), 3,4-dimethoxybenzyl GSL (10) and 2-phenylethyl GSL (gluconasturtiin, 13). GSL breakdown products obtained by hydrodistillation (HD) and CH₂Cl₂ extraction after hydrolysis by myrosinase for 24 h (EXT) as well as benzyl ITC were tested for their cytotoxic activity using MTT assay. Generally, EXT showed noticeable antiproliferative activity against human bladder cancer cell line UM-UC-3 and human glioblastoma cell line LN229, and can be considered as moderately active, while IC₅₀ of benzyl ITC was 12.3 μg/mL, which can be considered as highly active.     

Complex macromolecular structures from stable radical containing block copolymers

A novel synthetic strategy for the synthesis of graft copolymers is reported. Block copolymers containing segments with stable nitroxyl radicals side groups were first prepared by anionic polymerization, which were then used as a precursor for the subsequent nitroxide-mediated radical polymerization (NMRP) of styrene. This way, block–graft copolymers with polystyrene side chains grafted from one of the blocks were successfully synthesized in a controlled manner. In addition, block–graft copolymers with grafted polystyrene chains and a poly(tert-butyl methacrylate) block were subjected to hydrolysis to yield the corresponding amphiphilic polymers. The structures and the molecular weight characteristics of the polymers were characterized by spectral and chromatographic analyses. The surface morphology of thus obtained polymers was also investigated by microscopic techniques. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 62–69     

Anti-Inflammatory Effect of Phytoncide in an Animal Model of Gastrointestinal Inflammation

Background: Phytoncide is known to have antimicrobial and anti-inflammatory properties. Purpose: This study was carried out to confirm the anti-inflammatory activity of two types of phytoncide extracts from pinecone waste. Methods: We made two types of animal models to evaluate the efficacy, an indomethacin-induced gastroenteritis rat model and a dextran sulfate sodium-induced colitis mouse model. Result: In the gastroenteritis experiment, the expression of induced-nitric oxide synthase (iNOS), a marker for inflammation, decreased in the phytoncide-supplemented groups, and gastric ulcer development was significantly inhibited (p < 0.05). In the colitis experiment, the shortening of the colon length and the iNOS expression were significantly suppressed in the phytoncide-supplemented group (p < 0.05). Conclusions: Through this study, we confirmed that phytoncide can directly inhibit inflammation in digestive organs. Although further research is needed, we conclude that phytoncide has potential anti-inflammatory properties in the digestive tract and can be developed as a functional agent.